Palomar Lasers are one of the most popular aesthetic laser systems in use because of the their versatility and they are one of the most well built laser systems on the market. And while the handpieces have a very long shelf life, with use overtime, they can start to look worn down, become cracked and damaged from daily use. At some point, your Palomar handpiece will need to be completely refurbished. Other components on the main systems of the StarLux 300, 500 and the ICON will also breakdown or just need extensive maintenance. Below are some of the most requested Palomar system repairs and what Apex can do to repair your Palomar Laser.
Palomar Laser Repair
Palomar Laser Repair Services
Handpiece and Base Unit Repairs
Vectus, Icon, StarLux 500, StarLux 300, MediLux, EsteLux and Palomar Q Yag 5
Palomar Handpiece Repair
– 24 Hour Handpiece Repair –
We carry outer shells and internal components for all of the StarLux 300, StarLux 500, Icon, MediLux and EsteLux handpieces. We can repair all of these handpieces with OEM parts at a fraction of the cost of what Palomar would charge you directly. Upon receiving your handpiece, we will test the unit, determine what internal components need replacing based on error codes and performance. Components replacements and service can include the flash lamps, light guide, trigger cables, polishing crystals and replacing cables. We will also reset the shot counts and calibrate the handpiece. Additionally if you handpiece has cosmetic damage to the outer shell, we will replace that too. Your handpiece will be returned to you looking and working like new.
Palomar Icon and StarLux Handpiece Repairs:
- Lux G, Max G, Lux R, Lux Rs, Max R, Max Rs, Lux Y, Lux Ys, Max Y, Max Ys, Deep IR, Max IR
- Lux1540, Lux 2940, Lux 1064+, Lux 1440
Vectus Handpiece Repair:
Apex Medical Laser repairs Vectus handpieces at significant savings compared to the manufacturer. We will completely refurbish your handpiece with OEM parts and reset the shot count. We also carry both the Large and Small tips for your Vectus handpiece.
MediLux and EsteLux Handpiece Repair:
- All handpieces.
All Handpiece Repairs Are Fully Warrantied
We stand by our repair work. That is why we have a no questions asked repair warranty. If for any reason you are not satisfied with the condition or appearance of your handpiece, simply return it to us and we will repair it to your satisfaction.
Free Palomar Repair Quote
Get a free repair quote for your Palomar Laser or Palomar handpiece. Be sure to include any error codes on the form.
Palomar Lux 1540 Handpiece Repair
Palomar Lux 1540 handpiece repair can be very expensive. As a third party provider, we can save you on these costly repairs versus what the manufacturer will charge. Apex Medical Lasers is one of the few third part laser repair vendors capable of repairing the Lux1540 handpiece. The Lux1540 is an actual laser versus the other Palomar IPL handpieces and is more complicated to repair. However we have completed many repairs on these units and can easily bring your equipment back to full working condition. Contact us today to learn more about repairing your 1540 handpiece.
Palomar Base Unit Repairs
Palomar Icon Repairs
Apex Medical Lasers has been repairing Palomar Icon equipment since 2011 and have become highly specialized in repairing all components for the Icon system. We can save you substantial time and money on these repairs with no expensive re-certification fees that are charged by the OEM. We have all the parts, tools and skills, required to make these repairs and we only use OEM parts.
Palomar Vectus Repairs
Save on expensive manufacturer repairs. Our technicians can fully restore your Vectus laser system.
Palomar StarLux 500 / StarLux 300
We carry all the OEM parts required to repair the StarLux laser systems and can ensure a swift turnaround time.
Palomar MediLux and EsteLux Repairs
We can repair both of these older units as we carry parts for them and we also buy old Palomar equipment.
Power Supply Repairs
– Power Supply Repairs in 24 to 48 hours –
Are you getting a 051 error code on your Palomar Starlux 300 or 500? Are you getting power supply error codes on your Icon? Power down your laser; wait 5 – 10 minutes and start it up again. If you are still getting the same error code or another power supply related error code, you probably need to replace the part.
We carry OEM power supply components in our shop and can have your system fully repaired and up and running within 24 to 48 hours. Apex Medical offers fast turnaround times, because we know how critical your cosmetic laser is to your business. We have completed hundreds of power supply repairs for Palomar equipment and can save you money on expensive repairs offered directly from the manufacturer.
Water Flow Errors / Cooling System Repairs
– Our modules will have your system in ready mode in 2 minutes –
One of the most common errors that occurs on any system is due to water flow errors. That is because water pumps are used to cool down the systems this includes the internal parts as well as the handpieces that are attached. This can result in costly damage to your laser equipment. We recommend you address these issues immediately to avoid further damage to your Palomar laser.
Please contact us with the error code you are receiving. It may be as simple as replacing the water filter or the water flow switches or in other cases we may need to replace the water pump and other associated water flow parts. We have OEM parts in stock so we can provide a very quick turnaround.
Touchscreen Repairs
There may be many reasons why your touchscreen is not working correctly. We can diagnose your unit and repair your StarLux or Icon touchscreen within 48 hours. If it is simply cracked, we carry OEM touchscreen parts and can replace the touchscreen within 24 hours of our receiving the unit. Contact us today for more information and assistance regarding your touchscreen issues. We’ll help you save money and time on expensive repairs compared with the manufacturer.
Free Repair Estimates
Call Us Today at (813) 838-8794!
If your handpiece is damaged, not working or needs to be refurbished, give us a call for a free quote. We can do preliminary troubleshooting over the phone. All estimates we provide are free.